barscaret-downcaret-leftcaret-rightcaret-upcheckchevron-leftchevron-rightfile-pdfinfosign-in-altsignin text-widthtimesyoutube

Getting Started > Managing Device Users & Attributes

Adding a location

Updated on September 20th, 2022

This article explains how new locations can be added into Miradore using two methods:

1. Via the Attributes page

2. through the Settings tab of the Device page. Both ways are described below.

How to add a new location through the Attributes page

1. Navigate into the Company > Attributes page in the Navigation menu and go to the Locations tab. Then use the green Add button to create a new location.

Locations tab under the attributes in Miradore

After that, a wizard for adding a new location appears on top of the page.

2. Type in a name for the new location into the Location field, and use the Parent field to select a parent if you want to add the new location as a part of a location hierarchy. You can also leave the Parent field empty if you don't wish to add the new location to any hierarchy.

3. Complete the wizard by clicking Add.

4. Afterward a notification will appear and tell whether the new location was added successfully. If the process was successful, you may click Close to exit from the wizard.

How to add a new location through the device page

Another handy way to add a new location is to do it through the Location field in the device page settings.

1. The Location field can be found in the Settings tab of a device page. Switch the form into Edit mode, and open the drop-down menu from the Location field.

Example of locations of a specific device

2. A wizard for adding a new location appears at the bottom of the Window. Use that to add a new location. Enter a name for the new location into the Location field, and use the Parent field to define a parent for the new location. You can also leave the Parent field empty if you don't wish to add the new location into a hierarchy. Complete the process by clicking Add.

If the process was successful, the new location appears on the list and is ready for use.

More information:

About users, locations, and organizations

  • This field is for validation purposes and should be left unchanged.

Previous Article:
«

Next Article:
»